|
![]() |
 |
KM Model NO. PBS-505PC, PBS-605PC, PBS-705PC, PBS-905PC |
• PBS-905S-VS
  |
|
• PBS-905PC
|
|
PBS-905 / 1005 S, D, T, Q:
To arrange in pairs with the inside mould-labeling device, it can not only
save the twice-finished cost and time but also offer the production of
automation systems for you.
Optional accessories:
Parison control (30 points)
Handle de-flashing unit
Auto cutting unit
Post cooling unit
Inside mould labeling device
Style:
Drive by all serve control
Fast movement
Move to the setting position accurately
Easy operation
Easy maintenance
KM-PBS-705 S, D / KM-PBS-905S, D:
These models are suitable for large and long gauge hollow articles, optional
equipment can be installed for stackable Jerry can .There are two types of
mold platens:
In square shape:
Even mold clamping pressure, especially suitable for toys with much more
flash.
In rectangular shape:
To co-operate with optional handle de-flashing unit and taking-off robot to
produce rectangular jerry can.
Bottom blowing unit can be delivered optionally.
|
This model is a blow molding machine with single
accumulator for producing high quality, high clarity and gloss water tank of
2.5~5 gallons. This machine adopts PLC control. In blowing unit, we use a
bottom blowing device to make products in shorter cycle time, higher
efficient.
Optional:
MOOG 30 points thickness programmer to obtain products in even thickness.
 |
| Name |
Unit |
KM-PBS-905 |
| Screw diameter |
mm |
90 |
| Screw motor |
hp |
60 |
| Screw RPM |
r.p.m. |
56 |
| Screw L/D ratio |
L/D |
22/1 |
| Number of heaters |
zone |
10 |
| Heating capacity |
kw |
25 |
| Extruding capacity |
kg/hr |
200 |
| Max. diameter of die mouth |
mm |
180 |
| Open/Close mold limit |
mm |
400-900 |
| Length of mold capacity |
mm |
300-800 |
| Width of mold capacity |
mm |
630 |
| Pump motor |
hp |
30 |
| Clamping force |
ton |
17 |
| Dry cycle |
time/hr |
600 |
| Oil tank capacity |
gallon |
190 |
| Accumulator |
kg |
3 |
| Air pressure |
kg/cm² |
10-12 |
| Min./Max. diameter of product |
mm |
150-350 |
| Product capacity |
liter |
5-20 |
| Total power (approx.) |
kw |
92 |
| Machine net weight |
kg |
10000 |
| Gross weight |
kg |
12500 |
| Machine dia. |
m |
4.7x2.8x4 |
|
 |
|
| Model No. |
Unit |
PBS-905S |
PBS-905D |
PBS-905Q |
PBS-905O |
| Max. product capacity |
C.C. |
5,000~10,000 |
1,500~5,000 |
1,000~2,000 |
300~500 |
| Min./Max. dia. of product |
mm |
150~300 |
100~180 |
80~150 |
30~60 |
| Screw diameter |
mm |
90 |
90 |
90 |
90 |
| Screw L/D ratio |
|
24/1 |
24/1 |
24/1 |
24/1 |
| Inverter motor |
HP |
50 |
50 |
50 |
50 |
| Screw rotating speed |
r.p.m. |
15~65 |
15~65 |
15~65 |
15~65 |
| Extruding capacity |
kg/hr |
130 |
130 |
130 |
130 |
| Outer diameter of die mouth |
mm |
240 |
135 |
65 |
35 |
| Mould center distance |
mm |
- |
250 |
140 |
80 |
| Clamping force |
ton |
16.0 |
16.0 |
16.1 |
20 |
| Oil hydraulic drive motor |
HP |
25 |
25 |
25 |
25 |
| Dry cycle |
sec. |
5.7 |
5.7 |
6.0 |
6.0 |
| Pressure of air |
kg/cm² |
6~8 |
6~8 |
6~8 |
6~8 |
| Compressed air consumption |
L/min |
1,500 |
1,500 |
1,500 |
1,500 |
| Average energy consumption |
kw/h |
64 |
65.5 |
68 |
73 |
| Machine net Weight |
kg |
10,000 |
12,000 |
12,000 |
12,000 |
| Gross weight |
kg |
11,500 |
13,000 |
13,000 |
13,000 |
| Machine dimension |
m |
4.4x3x2.9 |
4.5x3x2.8 |
5.3x2.5x2.4 |
5.3x2.5x2.4 |
|
 |
For use with in-mold labeling machine. Open-close daylight of mold clamping are specified upon request. |
|
|
MOLD PLATEN DIMENSIONS UNIT:mm
| NO. |
Max. |
Min. |
A |
B |
C |
D |
E |
F |
G |
H |
I |
J |
| PBS-905S,D |
640 |
240 |
450 |
65 |
50 |
220 |
60 |
220 |
449 |
18 |
220 |
165 |
| PBS-905Q |
500 |
200 |
630 |
55 |
50 |
420 |
60 |
200 |
429 |
18 |
310 |
150 |
| PBS-905O |
420 |
80 |
650 |
65 |
50 |
420 |
60 |
200 |
429 |
18 |
320 |
150 |
|
|
|
|
|
